3s halter ring
17mm half round
Colour : (please choose)
1 pair = 2 pieces
 laser cut from Plexiglas® XT

These halter rings were laser cut from our own production.
The edges are not subsequently rounded, but rather angular, but not sharp-edged.
Reworking is possible with a deburring blade (please be careful) or with fine sandpaper (from grain =>180), but not necessary.
We can also produce your desired halter rings and / or other sizes.

NOTE ON UNFINISHED AND POLISHED:
 Laser cutting (burning) produces a "smoke haze",
which can be removed with e.g. a soft chamois leather and Plexiglas polish or glass-ceramic cleaner (commercially available).
in circular movements with a little pressure.
If you want to do it yourself, choose "unfinished", otherwise "shiny polished" for an extra charge per pair, which we will then do.

Dimension :
Outer dimensions : 33.75 x 31.9 mm = ~ 3.4 x 3.2 cm
Thickness : 3 mm (for mirrored) 4mm for white and clear
1x inner hole semicircular : width 18mm x length 20 mm = 1,8 x 2 cm
3 x slot width = passage width for webbing / leather / fabric : 17 x 3,2 mm
The arrangement of the slots to the centre axis of the circle is : centred

suitable for fastening with webbing, imitation leather strap, leather strap up to ~17x3 mm width.

Plexiglas® is a solid plastic which is slightly flexible and rather brittle.

Our guarantee promise: 
If a Plexiglas® halter ring made by us should break within 2 years after purchase,
take a picture of it with the invoice and send it to me via WhatsApp Mobile : 0049 (0) 175 80 42 546
and I will send you the same halter ring free of charge.

This article is only suitable for decoration purposes or for hobby horses, not for halters of real horses !
Attention : Not suitable for children under 3 years, as small parts can be swallowed.

The illustrated webbing, screw rivets and ruler are not included in the scope of delivery, but serve as an example of use.