2s halter ring
17mm from the centre
colour : SILVER mirrored
1 pair = 2 pieces
lasered from Plexiglas® XT
"mirrored" means that it is transparent clear Plexiglas® which has a film bonded to one side, where the side facing out is white and
opaque. These halter rings are then produced as normal and mirrored, so that they can be attached with the foil side facing Hobby Horse.
These halter rings were laser cut from our own production.
The edges are not subsequently rounded, but rather angular, but not sharp-edged.
Reworking is possible with a deburring blade (please be careful) or with fine sandpaper (from grain =>180), but not necessary.
We can also produce your desired halter rings and / or other sizes.
Dimension :
Outer dimensions : 30,75 x 30,75 mm = ~ 3,1 cm
Thickness : 3 mm
1x inner circle diameter : Ø 20 mm = 2 cm
2 x slot width = passage width for webbing / leather / fabric : 17 x 3,2 mm
The arrangement of the slots in relation to the centre axis of the circle is : from the centre
suitable for fastening with webbing, imitation leather strap, leather strap up to ~17x3 mm width.
Plexiglas® is a solid plastic which is slightly flexible and rather brittle.
Our guarantee promise:
If a Plexiglas® halter ring made by us should break within 2 years after purchase,
take a picture of it with the invoice and send it to me via WhatsApp Mobile : 0049 (0) 175 80 42 546
and I will send you the same halter ring free of charge.
This article is only suitable for decoration purposes or for hobby horses, not for halters of real horses !
Attention : Not suitable for children under 3 years, as small parts can be swallowed.
The illustrated webbing, screw rivets and ruler are not included in the scope of delivery, but serve as an example of use.
